New Items

Ministar Features -Working Temperature reached within 1 second4 Bar Working PressurePatented infrared heateracoustically and optically assisted operator guidanceScan function with immediate programmingSurrounding channel for excell pelletsThe compact pressure moulding unit MINISTAR S® equipped with scanning technology: scanner reads the coded material, allowing programming of all important parameters such as heating time, temperature and cooling time. In other words: precise pressure moulding results are reached in record time thanks to the extremely fast, patented heater and working pressure of 4.0 bar, adjustable via pressure regulator. New generation equipped with user-friendly membrane keypad and large display. All operating parameters are monitored and indicated on the display.

Universal Guide for All on 4/5/6 cases. Single universal guide for both Maxilla and Mandible.

The Guide is placed into a 2mm osteotomy that is made in the midline position of the maxilla or mandible and the band is contoured to follow the arch of the opposing arch.
The Guide also assists in retracting the tongue in mandibular cases. The vertical lines on the Guide are used as a reference for placing parallel anterior implants and for drilling at the correct angulation to place posterior implants, which should not be greater than 45°.
Going with the drill from one corner to the other corner of the rectangle formed by two lines, and angulation of approximately 30° is obtained

Design:

 

• We have given Straight lines at a 7mm distance from each other (Indicating the axis of all the Tooth). From Molar region with have put different degrees viz. 17º, 30º, 45º as per the degrees of abutments available in the market.

Use:

• An incision is made for flap elevation. A 2-mm twist drill is then used to make a 10-mm osteotomy in the midline. (Center of the Maxilla or Mandible ridge). Place the Guide in the osteotomy site. Drill 2 Straight (Incisor Region) and 2 Angled to avoid the sinus and to keep the implant in the solid bone as required.

The Carefusion Pulmonetic LTV 950 ventilator is a lightweight, high-performance device that is designed to provide the maximum functionality. It was designed for use by adults and pediatrics weighing a minimum of 11 lbs that need positive pressure ventilation delivered invasively or noninvasively. The LTV 950 is intended for use in institutional, home care, and transport settings as a source of continuous or intermittent ventilatory support.

• Turbine technology that allows the LTV Series Ventilator to operate without an external compressed gas source.
• CPAP, SIMV, Control, Assist / Control and Apnea Backup ventilation modes.
• Volume Control, Pressure Control and Pressure Support ventilation.
• Monitors for Breath Rate (f), I:E Ratio, MAP, Minute Ventilation (VE), PEEP, PIP, and Tidal Volume (Vte).
• Weight: 13.4 lbs

 

 

Material  ; 3Y-TZP
Flexural Strength (MPa)  1,380
Translucency (%)1)   51
Shade      white
Thickness (098 x mm)  10

provides a 9.3” printing area 22 cm Z-axis and dual-linear railsHigh 4K ResolutionMulti-Resin Compatibility
Multi-Resin Compatibilityultra-high resolutionFlexible Design. ...Rapid Prototyping. ...Print on Demand. ...Strong and Lightweight Parts. ...Fast Design and Production. ...Minimising Waste. ...Cost Effective. ...Ease of Access.

• Easy to use
• Light-weighted
• Corrosion resistance
• Made of high-quality non-magnetic stainless steel.

The paralleling guide is used for aligning 2 interforaminal implants in the edentulous mandible to the median plane. A hole is drilled in the middle of the mandible using a pilot drill, which is easily aligned to the median plane. The distance to the middle can be accurately transferred to the opposite side by swiveling the fitted paralleling guide.
Parallel Drilling Guide, For easy Parallel Implant insertion. (Diameter 2.1mm for the Pilot Drill & 1.85mm size of Guide Pin). Insert the Paralleling Drill Guide into the First Pilot Drill with the Guiding Pin. With the flexible joint, a precise adjustment for the following Pilot Drilling is Possible.

 

The Medical Gas Pipeline System is a key element of every hospital. The MGPS provides vital medical gases for patient ventilation and various clinical applications. Installing a reliable central medical gas supply involves a great deal of responsibility, which we are happy to take on for you – with specialist knowledge, outstanding systems expertise, and a comprehensive range of after-sales services. We make sure that medical gases and vacuum are always supplied to patients in the prescribed quality and at the right pressure –around the clock, 365 days a year. We plan, install and maintain systems that are not only reliable and perfectly customized to your needs, but that also meet the highest quality and safety standards.

 

The Gas Management System is the beginning of a supply chain whose last link is the patient and provides vital medical gases. This involves a great deal of responsibility, which we are happy to take on for you with specialist knowledge, outstanding system expertise, and a comprehensive range of services. ADDLER Gas Management is made up of many different components that all smoothly interconnect to ensure that compressed air, oxygen, and other medical gases as well as vacuum are permanently available in every department.

 

We believe ventilation safety of patients during treatment in hospital is of vital importance and we ensure that each patient and a new-born baby which receives oxygen through the nose, every breath is monitored. The same applies when a coma patient is artificially ventilated or a patient is anaesthetized for an operation. In all such cases, the health and life of the person being treated depends on reliably functioning ventilation and anaesthesia machines as well as a safe and constant supply of medical gases.

Bed Head Panels Double Railing